Jamil Alsayaydeh

Technical University of Malaysia Malacca | utem · Faculty of Engineering Technology

In this article, a planar monopole two-element multiple input multiple output (MIMO) array has been designed and characterized with the intention of ultra-wideband (UWB) applications. The array has a voltage standing wave ratio (VSWR) working bandwidth (BW) of 13.258 GHz between 3.394-16.652 GHz, with a fractional BW (FBW) of 132.28% with respect t...

With the advancement of technology, there is an urgency to produce students equipped with the 21st Century skills to keep up with the Fourth Industrial Revolution. This is in line with the aspiration of the Malaysian government to develop holistic graduates and transform education as in the Malaysia Education Blueprint 2015-2025. Service learning p...

The chapter is devoted to the analysis of model checking technique applicability in energetics scenarios. A review of model checking technique application taking place in safety–critical scenarios has been conducted. Proven and widely adopted TLC checker has been considered as an instrument for design solutions verification. To this end, the Tempor...

Internet of Things (IoT) is one of the newest matters in both industry and academia of the communication engineering world. On the other hand, wireless mesh networks, a network topology that has been debate for decades that haven't been put into use in great scale, can make a transformation when it arises to the network in the IoT world nowadays. A...

This paper describes a scheme and implementation of a mirror turned intelligence that results in interactive mirror planned via a Raspberry Pi as the key controller. The most important principle of graphical representation of this prototype is that it can display customized information such as clock, calendar, current weather, food menu and even fo...

Future engineers shall not only good at knowledge and technology but also good at other attributes such ethical, professional as well as managing people and emotion. Service learning is an effective education model to develop more holistic engineers. However, there is a lack of service learning frame- work that integrates technology, in order to ac...

In this article, a new small size planar microstrip tree profile shaped Ultra-Wide Band (UWB) antenna with partial ground plane has been presented. The antenna is designed for chipless RFID tags that are working in UWB region. The operating frequency of the antenna is between 2.72 GHz to 11.1 GHz which covers the entire UWB frequency band. The ante...

In this paper, the question on the expediency of checking the model, the model checking method is applied to, is discussed. To this end, corresponding technique has been proposed. Named technique is based on differentiation between the concepts of analytical plane of model perception and the concepts of corresponding implementation plane. The techn...

In this article, a microstrip-feed planar monopole ultra-wide band (UWB) antenna is proposed for the chipless RFID (CRFID) tag-reader systems with the intension to reduce the size of the tag. This antenna is keyhole shaped and small in size of 32 × 20 mm 2 compared with other existing antennas in the retransmission-based chipless CRFID system. The...

Mobile Ad-hoc Network (MANET) is currently popular at demand as a solution in numerous deployments that cover from the combat zone to the user's parlor due to its quickly deployable with adaptive topology and able to function without any infrastructure. However, variable topology is one of the key challenges since the network throughput and energy...

Lately, the security technology business has been offering an inflexible and expensive alert system. Home security assumes an essential role in the current lifestyle to help identify illegal activities. In addition to the increasing familiarity with productive home security system, the execution of real-time alert system is enticing for users. Home...

Service-oriented architecture (SOA) and Internet services technologies offer advanced solutions for creating distributed business processes and applications. At the same time, services must be available to a growing number of users and satisfy their requirements for both functional and non-functional properties of services. The problem of services...

Mobile Ad-hoc Network (MANET) is currently popular at demand as a solution in numerous deployments that cover from the combat zone to the user’s parlor due to its quickly deployable with adaptive topology and able to function without any infrastructure. However, variable topology is one of the key challenges since the network throughput and energy...

Sulfur dioxide is one of the most commonly found gases, which contaminates the air, damages human health and the environment. To reduce the damage, it is important to control the emissions on power stations, as the major part of sulfur dioxide in the atmosphere is produced during electric energy generation on power plants. The present work describe...

Algorithm visualization which is a form of high-level dynamic visualization of software that uses user interface techniques to portray and monitor the computational steps of algorithms. Moreover, algorithm visualization systems are also useful tools in algorithm engineering, particularly at several stages during the design, implementation, analysis...

The problem of combinatorial optimization in relation to the choice of location of power supplies in solving the problem of development of urban power distribution networks is considered. Two methods of placing power supplies and securing consumers for them have been developed to solve this problem. The first developed method is to place power supp...

Monitoring the progress of the construction industry is recognized as one of the key elements to the success of a construction project. The implementation of these as corrective measures and other appropriate actions can be taken in a timely manner, thus enabling the actual performance to be as close as possible to the desired outcome. However, the...

In this paper, an alternative improvement is proposed which is the adaptive wireless access networks-based optical backhaul convergence that will greatly promote to use the existing resource of MANET (mobile ad hoc network). However, these characteristics itself acts as a drawback to the MANET applications such as the random distribution of nodes a...

In the retransmission based chipless RFID, the receiving and transmitting antennas are an essential element and play a vital role for the tag performance and occupied area as well. In this article a new planar microstrip keyhole shape UWB antenna for retransmission based chipless RFID tag is proposed. The proposed antenna is a UWB antenna, covering...

The objective of this article is to experimentally test for the automatic control of the magnetic separator efficiency of the magnetic product. The developed process depends on the fact that the electromotive force in electric coil located on the pole of the magnetic system of the separation depends on its efficiency with the magnetic product. A fu...

In today’s accelerated growth of mobile device technology, resource utilization in access network will continue to draw more attention to the increasing mobile user devices and applications. The main objective is to address the issue of QoS resource utilization efficiency. This paper combines the Ant Colony Optimization (ACO) algorithm and the Part...

Previous study revealed that the advancement of technology has widen the potential for all individual including the disable to participate in any sport competition. Deaflympicand Malaysia Deaf Games,SOPMArespectively provide the opportunity for the deaf people to compete in sports event internationally and locally. From the literature, it is shown...

This paper is about building a prototype of vehicle ignition using fingerprint sensor. This system can prevent the vehicles from being stolen. It is developed to control the ignition of the vehicle through the fingerprint scanner. This system consists of GSM SIM 900 that connects to the Arduino which is the microcontroller of the project. To make s...

This paper entitled Development of Smart Dustbin by Using Apps. Arduino as a controller between ultrasonic sensors, buzzer, led, fan and WiFi Module. This system implemented so that cleaning department management or cleaners can be aware with the overflow of rubbish of a dustbin at certain place. It is very useful in daily life and important for al...

New technology applications in managing human living styles, workplaces including residences have led to the discovery of different methods of interacting and controlling both users and the buildings. This piece of research work proposed a simpler system for users' interaction with home appliances, using Bluetooth technology for operation support....

This paper investigates Radio Frequency Identification (RFID) finder powered by Radio Frequency Energy Harvesting. Misplaced and losing item is a normal situation that happens almost anytime and anywhere. When this problem occurs in situation during the emergency time or in hurry, panic will come and start searching around for that lost item from w...

Research and development advancements in the area of Vehicle Door Security using Smart Tag and Fingerprint System. Fingerprint biometric is one of the popular, ubiquitous, reliable, economical and efficient biometric technologies. Due to its versatility, fingerprint biometric is applicable. Fingerprint is popular because of its universality, unique...

Research and development advancements in the area of Vehicle Door Security using Smart Tag and Fingerprint System. Fingerprint biometric is one of the popular, ubiquitous, reliable, economical and efficient biometric technologies. Due to its versatility, fingerprint biometric is applicable. Fingerprint is popular because of its universality, unique...

The competency of observing continuous record of water content or moisture of minerals, then control it in actual real-time basis is crucial that will affects mineral ore quality, cohesivity, process control, material handling and flowability. This paper describes experiment of a Random Stratified Sampling Sweeping Microwave method, moisture conten...

The Quality of Service (QoS) resource consumption is always the tricky problem and also the ongoing issue in the access network of mobile wireless part because of its dynamic nature of network wireless transmissions. It is very critical for the infrastructure-less wireless mobile ad hoc network that is distributed while interconnects in a peer-to-p...

Research and development advancements in the area of wireless technologies give rises of mobile ad hoc networks (MANET) domain but is constrained to the single networks and stand alone. Furthermore, the communication networking applications requirements mostly still depends on fixed infrastructure networks that lead to MANET need to communicate wit...

Modern approaches to distributed software systems engineering are tightly bounded with formal methods usage. The effective way of certain method application can leverage significant outcome, in terms of corresponding time costs reduction for instance. To this end the TLC model checker has been considered – with respect to TLA+ specifications with c...

The scale and the complexity of modern network solutions built upon the promising and popular paradigm of the Internet of Things brings to the table the vital need for novel approaches to these solutions designing. To foster the further developments in this direction, the stratified model of the Internet of Things infrastructure has been proposed....

Purpose. To substantiate the automatic method of control of mass fraction of iron in ore concentrated by means of industrial magnetic separator. Methodology. Physical and mathematical formulation of regularities of separator magnetic field formation in working area and experimental investigation of dependence of the magnetic field induction from on...

Purpose: To give scientific substantiation of the possibility of the automatic optimization of the technological complex of the iron ore magnetic separation by the signals of electromagnetic field of the separator. Methodology: It involves experimental determination of the mathematical model of the complex and computational solution of the problem....